Side-by-Side Coroflex® HV Series Architecture
All three Coroflex® high-voltage families manufactured by Coroplast Fritz Müller GmbH & Co. KG share flexible bare stranded E-Cu ETP1 copper conductors (DIN EN 13602), talc-free high-voltage orange (RAL 2003) silicone rubber insulation (2G), ISO 6722-1 Class E thermal endurance (-40 °C to +180 °C continuous for 3,000 h; +205 °C short-term for 240 h), and rated electrical withstand of 600 V AC / 1,000 V DC (8.0 kV spark test / 5.0 kV 5-minute test).
Selecting the right series comes down to EMC exposure, harness routing geometry, and whether you are feeding high-current traction phases or multi-conductor auxiliary subsystems.
Verified OEM Architecture Comparison — Coroflex® 9-2611, 9-2652 & 9-2641
| Specification | Coroflex 9-2611 (Single Shielded) | Coroflex 9-2652 (Single Unshielded) | Coroflex 9-2641 (Multi-Core Shielded) |
|---|---|---|---|
| DIN / Coroflex Code | FHLR2GCB2G (180HV SSC) | FHL2G (180HV USC) | FHLR2GCB2G (180HV SMC) |
| LV 216 Specification | LV 216-2 Table A.2 | LV 216-1 Table A.1 | LV 216-2 Table A.5 |
| Available Sizes | 1C × 2.5 to 95 mm² (10 SKUs) | 1C × 2.5 to 95 mm² (10 SKUs) | 2C–5C × 2.5 / 4 / 6 mm² (9 SKUs) |
| EMC Shielding | Tinned Cu braid (min. 85% coverage) + ALU-PET foil (min. 20% overlap) | Unshielded (enclosed packs & PDUs) | Tinned Cu braid (min. 85% coverage) + ALU-PET foil (min. 20% overlap) |
| Min. Bend Radius (Static / Dynamic) | 3 × OD / 6 × OD | 2 × OD / 4 × OD | 3 × OD / 6 × OD |
| Primary EV Use Case | Battery-to-inverter, inverter-to-motor, external chassis DC bus | Inside metallic battery packs, junction boxes & enclosed PDUs | On-board chargers (OBC), DC-DC converters, e-compressors, PTC heaters |
When to Choose Shielded 9-2611 vs Unshielded 9-2652
High-frequency PWM switching from EV traction inverters generates intense electromagnetic interference that couples into nearby CAN bus, resolver, and low-voltage sensor harnesses. Any high-voltage run exiting a metallic enclosure along the vehicle chassis requires the 360° tinned-copper braid and aluminum/PET foil screen of Coroflex 9-2611 (FHLR2GCB2G) terminated into EMC HV connectors or shielded cable glands.
Inside a fully enclosed metal battery pack, power distribution unit (PDU), or stationary test cabinet where the enclosure itself provides Faraday shielding, Coroflex 9-2652 (FHL2G) removes the shield layer to cut cable outer diameter, weight, and bend radius down to 2 × OD static / 4 × OD dynamic — dramatically easing tight internal busbar-to-contactor routing.
Why Coroflex 9-2641 Simplifies Auxiliary HV Harness Processing
Auxiliary EV loads — including e-compressors, PTC coolant heaters, DC-DC converters, and 2- to 5-conductor on-board chargers (OBC) — typically draw moderate currents across 2.5 mm², 4.0 mm², or 6.0 mm² conductors. Routing multiple discrete single-core shielded cables consumes bulkhead glands and doubles EMC termination labor.
Coroflex 9-2641 bundles 2, 3, 4, or 5 color-coded silicone cores inside an extruded white circular modified-silicone inner filling layer beneath the braided screen and foil wrap. This high-roundness filling layer allows automated or manual rotary stripping tools to cut cleanly through the braided shield without nicking individual core insulation, eliminating hard-to-strip loose fillers and separating tapes.
Frequently Asked Questions
Can I use unshielded Coroflex 9-2652 outside a battery enclosure?
Unshielded FHL2G (9-2652) is engineered for use inside shielded enclosures such as metallic battery packs, PDUs, and test cabinets. External vehicle chassis runs subject to automotive EMC standards should use shielded FHLR2GCB2G (9-2611 single-core or 9-2641 multi-core).
Do Coroflex 9-2611 and 9-2641 share the same bending radius as 9-2652?
No. Per Coroflex official Technische Information sheets, shielded 9-2611 and 9-2641 specify a minimum bending radius of 3 × cable OD (static) and 6 × cable OD (dynamic), whereas unshielded 9-2652 allows a tighter 2 × cable OD (static) and 4 × cable OD (dynamic).
What is the white inner layer inside Coroflex 9-2641 multi-core cables?
It is an extruded circular modified-silicone filling layer over the twisted cores. It maintains tight cable roundness for reliable connector gland sealing and protects the underlying color-coded cores during rotary shield stripping.
Continue Engineering Research
Explore Related Coroflex® Guides & Series
Coroflex® HV Cable Series Referenced
More Technical Guides
Browse all 29 UK-stocked Coroflex® HV SKUs or submit a bulk freight RFQ.